Copper: AVR32 Breadboard Friendly Module
Powerful
32-bit Power, 60MHz operation, USB ready: The powerful Copper development board is a major upgrade from the 8-bit microcotrollers of yesteryear.
Easy
Fully compatible with the AVR32 Software Framework, this development board has hundreds of examples available out of the box. It is also fully compatible with the AVR32 Device Firmware Upgrade function, allowing full programming via USB. Plus, everything you need is on-board!
Buy
Starting at $34.99 Options include:
JTAG header Required for using with an external JTAG
Breadboard header Pre-solder the two 16-pin headers (note: otherwise header not included)
Specifications
AT32UC3B1256: 256KB of flash, 32KB of RAM, on board USB, up to 60MHz CPU clock with 1 wait state access to flash, DSP instructions
Integrated Device Firmware Upgrade capability (DFU) - programming over USB out of the box. No need for an external programmer, just the Atmel FLIP software or dfu-programmer (Open Source). Can recover DFU functionality even if user firmware does not work.
Integrated 3.3V output voltage regulator, 5V input, 150mA supply capability (MCP1702)
On board 12MHz crystal (feeds the on board PLL to allow numerous operation frequencies)
Reset button, DFU boot button
Power indicator LED
AVR32 JTAG header (requires the JTAGICEmkII or the AVR ONE!)
DIP 32 0.6inch spacing footprint - fits on breadboards. All available IO pins are brought out to pins, with numerous ground, 3.3V and 5V connectors.
100% RoHS Build: components, PCB finish, and solder
